Forum

How to connect AMB ...
 
Notifications
Clear all

How to connect AMB Spindles with Digital Control to BlackBox

Martin
(@martinbarfoed)
Member Admin

 

IMG 2856 (002)

BlackBox has support for controlling the speed of a spindle via the 0-10V output. The DI version of AMB spindles works well with this. The spindle has a 3 connector wire with the following color/function:

Green: 0-10V signal

White: GND

Brown: Permanent positive 10-26V

As the 0-10V output on the BlackBox (and also xPro v5) are isolated you must make a connection between PSU GND and the Tool Head GND. 

 

This topic was modified 9 months ago 4 times by Martin
Quote
Topic starter Posted : 22/02/2022 8:47 am
Share:
Back To Top